• PLS-500US10

    Features

    • Universal AC input of 90-264VAC 50/60Hz
    • DC Outputs 5V3A/9V3A/12V3A Type A 5V3A/9V3A/12V3A/15V3A/20V 2.25A Type C
    • Output Ports 10 x Type A, 10 x Type C
    • 500 Watts total output power all ports
    • Short circuit and over current protection
    PLS-500US10 500 Watts. Ten port USB-A & USB-C charging ports.

    Inquiry Info. PDF

  • PLV20S1000

    Features

    • 20 Ports for More Devices: Take your work efficiency to the next level. Our 1000W USB C charger supplies up to 1000W of power, and charges 10 sets 100W MacBooks or 16 sets 60W chromebooks or tablets or mobile phones simultaneously.
    • Controlled by an Intelligent App System: This charger features a timer switch. It can be set to turn on and off during off-peak hours, saving you money, improving energy efficiency, and promoting carbon neutrality.
    • Wide Compatibility: USB charging station fast charging to virtually all USB-C and devices, from phones and tablets to laptops and more.
    • Efficient Energy Conversion: The intelligent Power Allocation Solution increases the power conversion rate to 95%, provides industry leading efficiency to avoid wasting energy
    PLV20S-1000 1000 Watts. Twenty port USB-C charging hub. Intelligent control by smart App.

    Inquiry Info. PDF

  • PLV20ST-1000

    Features

    • 20 Ports for More Devices: Take your work efficiency to the next level. Our 1000W USB C charger supplies up to 1000W of power, and charges 10 sets 100W MacBooks or 16 sets 60W chromebooks or tablets or mobile phones simultaneously.
    • Controlled by an Intelligent App System: This charger features a timer switch. It can be set to turn on and off during off-peak hours, saving you money, improving energy efficiency, and promoting carbon neutrality.
    • Wide Compatibility: USB charging station fast charging to virtually all USB-C devices, from phones and tablets to laptops and more.
    • Efficient Energy Conversion: The intelligent Power Allocation Solution increases the power conversion rate to 95%, provides industry leading efficiency to avoid wasting energy.
    PLV20ST-1000 1000 Watts. Twenty port USB-C charging hub and docking station. Intelligent control by smart App.

    Inquiry Info. PDF

  • PLV20S-1000R

    Features

    • 20 Ports for More Devices: Take your work efficiency to the next level. Our 1000W USB C charger supplies up to 1000W of power, and charges 10 sets 100W MacBooks or 20 sets 45W Chromebooks or tablets or mobile phones simultaneously.
    • Controlled by an Intelligent App System: This charger features a timer switch. It can be set to turn on and off during off-peak hours, saving you money, improving energy efficiency, and promoting carbon neutrality.
    • Wide Compatibility: USB charging station fast charging to virtually all USB-C devices, from phones and tablets to laptops and more.
    • Efficient Energy Conversion: The intelligent Power Allocation Solution increases the power conversion rate to 95%,
    PLV20S-1000R 1000 Watts. Twenty port USB-C charging hub for rack mounting with external power supply. Intelligent control by smart App.

    Inquiry Info. PDF

  • PSUSB-1024 & PSUSB-2024

    Features

    • Compliant with USB battery charging specification 1.2
    • Provides up to 1.5A (CDP mode) or 2.4A (DCP mode) output currect on each port
    • Supports high speed 480 Mbps, full speed 12 Mbps and low speed 1.5 Mbps operation
    • Supports iOS and Android devices
    • Enables CDP/DCP mode switching automatically by manually connecting or disconnecting host computer port
    • If all devices are fully charged in DCP mode the unit would automatically cut of all port’s LED and power
    • Intelligently detects the power current of each port by the sensing meter with firmware and enables the ports LED to illuminate its corresponding colour. Charging: Red; Disconnected or fully charged: Green Sync Mode: Orange
    • These hubs can be cascaded with another unit of the same type to double the number of ports
    • Features Over-Voltage, Over-Current Protection and ±15kV (air), ±8kV (contact) ESD protection on each port
    • Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection on each port
    • High temperature protection is standard, if the unit’s temperature is higher than set limit it will cut off all output current immediately and all the LEDs of all ports would be flashing
    • Compact aluminium housing measures only 268 x 102 x 40mm
    • Powered by external universal AC input power supply with full safety approvals (supplied with the hub)
    PSUSB-1024 & PSUSB-2024. 10 port and 20 port USB2.0 5V 2.4A charging and data sync hub.

    Inquiry Info. PDF

  • PSUSB2012TC Type C Hub

    Features

    • Supports Downstream Facing Port (DFP).
    • Compliant with USB Spec. 2.0 / USB Type C Spec 1.2 & USB Battery Charging Spec 1.2
    • Enables to provide up to 5V 3A output current on each port; Supports iOS, Android devices.
    • Extends up to optimum 48 USB Type C devices by connecting cascade port with another 3 units.
    • Enables Sync/Charge mode switching upon manually connecting or disconnecting host port.
    • Enables Green Energy function (ECO Mode) automatically shutdown the hub when all devices are fully charged at Charge mode.
    • Supports Over-Current Protection & Short Circuit Protection on each port.
    • For the Over Temperature Protection, if the unit’s high temperature is over the setting, it would cut off all the output current immediately. At the meantime, the whole 12 ports LED would be green blinking.
    • Supports ±15kV (air), ±8kV (contact) ESD protection on each port.
    • Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection on each port.
    • The rear fans spec: SUNON Vapo DC Fan; Life Expectancy: 60,000 hours
    • Enables to start/cut off the fans automatically according to the temperature’s setup. If the board’s temperature is higher than the setting, it would start the fans automatically. On the contrary, if the board’s temperature is lower from the setting, it would turn off the fans automatically as well.
    PSUSB2012TC. Twelve port USB-C charging and data sync hub.

    Inquiry Info. PDF

  • 8 Port USB Hub

    Features

    • Compliant with USB battery charging specification 1.2
    • Provides up to 1.5A (CDP mode) or 2.4A (DCP mode) output currect on each port
    • Supports high speed 480 Mbps, full speed 12 Mbps and low speed 1.5 Mbps operation
    • Supports iOS and Android devices
    • Enables CDP/DCP mode switching automatically by manually connecting or disconnecting host computer port
    • If all devices are fully charged in DCP mode the unit would automatically cut of all port’s LED and power
    • Intelligently detects the power current of each port by the sensing meter with firmware and enables the ports LED to illuminate its corresponding colour. Charging: Red; Disconnected or fully charged: Green Sync Mode: Orange
    • The 8 port charging hub can be cascaded with 7 other units giving a total of 8 hubs and 64 ports.
    • Features Over-Voltage, Over-Current Protection and ±15kV (air), ±8kV (contact) ESD protection on eachport
    • Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection on each port
    • High temperature protection is standard, if the unit’s temperature is higher than set limit it will cut off all output current immediately and all the LEDs of all 8 ports would be flashing
    • Compact aluminium housing measures only 170 x 80 x 30mm
    • Powered by external 120W universal AC input power supply with full safety approvals (supplied with the hub)
    The 8 port charging hub provides a quick solution for quick charging or sync of up to 8 iPads, iPhones, iPods or other USB devices operating simultaneously. This is the perfect tool to effectively perform CDP/DCP mode switching. Ideal for medium capacity USB stations in house for charging and syncing a number of devices at the same time. Such as school classrooms, business conferences or meetings.

    Inquiry Info. PDF

  • 10-20 Port USB Hub

    Features

    • Compliant with USB battery charging specification 1.2
    • Provides up to 1.5A (CDP mode) or 2.4A (DCP mode) output currect on each port
    • Supports high speed 480 Mbps, full speed 12 Mbps and low speed 1.5 Mbps operation
    • Supports iOS and Android devices
    • Enables CDP/DCP mode switching automatically by manually connecting or disconnecting host computer port
    • If all devices are fully charged in DCP mode the unit would automatically cut of all port’s LED and power
    • Intelligently detects the power current of each port by the sensing meter with firmware and enables the ports LED to illuminate its corresponding colour. Charging: Red; Disconnected or fully charged: Green Sync Mode: Orange
    • These hubs can be cascaded with another unit of the same type to double the number of ports
    • Features Over-Voltage, Over-Current Protection and ±15kV (air), ±8kV (contact) ESD protection on each port
    • Supports 40A (5/50ns) & Peak Pulse Power 250 W (8/20 us) Surge and Transient spikes protection on each port
    • High temperature protection is standard, if the unit’s temperature is higher than set limit it will cut off all output current immediately and all the LEDs of all ports would be flashing
    • Compact aluminium housing measures only 268 x 102 x 40mm
    • Powered by external universal AC input power supply with full safety approvals (supplied with the hub)
       
    The 10 & 20 port charging hub provides a quick solution for quick charging or sync of up to 10 or 20 iPads, iPhones, iPods or other USB devices operating simultaneously. This is the perfect tool to effectively perform CDP/DCP mode switching. Ideal for medium capacity USB stations in house for charging and syncing a number of devices at the same time. Such as school classrooms, business conferences or meetings.

    Inquiry Info. PDF

Total of 18 results